Polyaspartic Polyurea
Citadel Floor Finishing System has a wide range of coatings for all your flooring needs. Polyaspartic Polyurea has unlimited advantages over other coating on the market. CFFS-PG 100 and RG-70 Polyurea is an elastomer, so it stretches and moves with the concrete, which gives you a waterproof, corrosion and chemical resistant, seamless floor every time. Citadel's easy to use 1:1 ratio makes for a simple year around 1 day installation.
Revolutionary
1 day installation
Product description
CFFS-PG 100
- Two component 100% solids, low VOC's, aliphatic polyaspartic that
was developed for UV stable marine applications, floor topcoats, chemical
resistance and corrosion control.
- Displays fast cure times with excellent adhesion characteristics.
- Custom designed to be quick gelling (40 minutes) in
order to optimize leveling and wetting properties
- Slow set version
can be spray applied at temperatures ranging from 0-120°F and in high humidity.
- Will provide a glossy smooth finish when cured.
- Can be rolled or brushed applied.
- 100% polyurea elastomer displays excellent chemical
resistance, water insensitivity and UV resistance at a wide range of temperatures.
- Emits virtually no odors and can be applied indoors with minimal disturbance contributed to high VOC levels that are found in most epoxies and polyurethanes.
CFFF -RG 70
- Two Component 70 % solids, aliphatic polyaspartic that has been developed for roller grade application for residential and commercial applications.
- Displays fast cure times with excellent adhesion characteristics with easy to use 1:1 ratio.
- Custom designed to be quick gelling (60 minutes) in order to optimize leveling and wetting properties
- Slow set version can be spray or roll applied at temperatures ranging from -20-120°F and in high humidity.
- Will provide a glossy smooth finish when cured.
- Can be rolled or brushed applied.
- 70% polyurea elastomer displays excellent chemical resistance, water insensitivity and UV resistance at a wide range of temperatures.
Product is available in primary colors and can be custom tinted on request
Primary Applications
- marine
protection for fiberglass, steel or wood
- UV-stable top coat
-
aircraft hangar floors
- low temperature equipment
- maintenance
facilities
- projects requiring UV stability
- industrial
shop floors
- car washes or wash bays
- secondary containment
- cooling towers
- mining equipment
- bridge
coatings
- water proofing
- wastewater treatment applications
Typical Physical Properties
| Tensile Strength | ASTM D412 | 6000 |
| Elongation | ASTM D412 | 100 |
| Tear Strength (PLI) | ASTM 2240 | 330 |
| Hardness, Shore D | ASTM D2240 | 73 |
| Flexibility, 1/8" Mandrel | ASTM D1737 | Pass |
| Flashpoint | ASTM Pensky-martin | >200 |
| Tabor Abrasion mg loss | ASTM D4060 | 30 |
| CS17-Wheel | 1 kg per 1000 cycles | |
| Viscosity B side 75°C | CPS1400-1500 | |
| Viscosity A side 75°C | PS700-800 | |
| Gloss | ASTMD-523 | 90+ |