Project of the Month:
Denver Power Plant
G4 Coatings of Colorado has been installing our new SLE-100 Epoxy in various stages of a Power Plant in Denver over the past few weeks.
They have coated approximately 50,000 sq. ft. with a single coat of SLE-100 and the feedback has been excellent.
Over the years, G4 has used many different Epoxy products and found that Citadel's SLE-100 has been one of the easiest and most reliable coatings to install.
Conditions are quite extreme as temperatures can get as high as 140 degrees during installation and the pot life or working time of SLE-100 is still over 30 minutes.
Cure times have also been averaging 6-8 hours walk on time in these conditions which allows a fast return to service.
Monthly Product Highlight: CFFS Eco-Prime
CFFS Eco-Prime is a single component, 100% solids aromatic Polyurea that has excellent adhesion properties to concrete and metal.
We have had some requests for a clear sealer for industrial shop floors and Eco-Prime is a great product to use as a stand-alone
low-traffic industrial shop floor sealer to drastically cut down in airborne dirt and dust. Eco-Prime is not UV stable, and in
this application is intended to act as a sealer and not a traffic coat. Virtually odorless, it allows for indoor use with minimal disturbance to surrounding activities.
Typical tack free time of 1-2 hours and hard dry in 3-6 hours makes this a great one day installation product to allow for a fast return to service.
Upcoming Events: Get Certified! - April 13-14
Become a certified Citadel Products installer by attending a training seminar. Citadel training sessions are
typically held on a monthly to bi-monthly basis depending on the number of interested parties. We
always welcome new installers but even if you have been to a previous session, consider a refresher
course because we are constantly working to improve installation techniques. Who knows, you may just
learn a new technique that could save you time and money! Please let us know if you are interested in
attending a training seminar, we would love the opportunity to showcase our current products and also
any new products and installation techniques!!
Click here for registration information
Tech Tip:
New Tramex CMEX II Moisture Meter
We are now carrying the new Tramex CMEX II digital moisture meter.
With the CMEX II, it has the ability to give instant and precise measurement of moisture content in concrete and other floors.
Incorporating plug-in ports for the optional Hygro-i® relative humidity probe and heavy-duty pin-type wood probe,
this moisture meter transforms into the ideal all-in-one instrument for the flooring professional.
Features:
. Measures up to 6.9% Moisture Content in Concrete.
. Large clear backlit digital display.
. Hold function "freezes" meter reading when inspecting areas where the meter face is not visible.
. 7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment. (optional)
. Attaches to a relative humidity Hygro-i ® probe for in situ testing of concrete to ASTM F2170. (optional)
Check out the product specifications: Tramex CMEX II Moisture Meter
|
