Innovative Flooring Solutions
Citadel Floor Finishing Products

Floor Coatings

Polyurea 1-HD

Polyurea-1 HD is the workhorse of the Single Component Aliphatic Polyurea family.  Polyurea-1 HD is a single component, UV-stable, Aliphatic Polyurea that has the best chemical resistance available on the market today.

 Polyone HD is used as a basecoat on polished concrete floors where transparency is required and in the Medici system.



Poly100-SC clear is a Single Component Polyurea primer coat that is used to seal concrete and provide an anchor for overlying systems such as the Medici Polyurea color Coating System.

As a 100% solids primer, it has zero VOCs, making it the ideal solution for minimizing odour and environmental impact. Its virtually unlimited pot life allows for work at any pace, but cures quickly when applied, allowing a mere 24 hour return to service. No mixing, no measuring, no waste, no hassle.

Poly350/Traffic Coat

Polyurea-350 is a two-component, 98% solids Polyurea primer/basecoat.

Due to its proprietary blend of resins, Polyurea-350 allows installers to “wet-out” large areas, including vertical surfaces, before broadcasting decorative aggregates such as quartz, vinyl chips, or flint. This longer “open time” results in perfect broadcasts every time, eliminating problems with light coverage, inconsistencies, or blemishes. Citadel’s Adjustable Cure Rate Technology allows the installer to customize the workability and cure times of this material for use in any climate.  

Ultra Hydro Stop Primer

Our water-based version of the popular Ultra-Hydro Stop Primer (used to mitigate high moisture concrete prior to coating) increases the possibilities for use and can expedite the installation process. 

Ultra-Hydro Stop H2O Primer is a two component, 50% solids, water-based, moisture blocking and pH resistant epoxy primer used to remedy concrete floors with high moisture readings up to 12 lbs. This Primer has excellent adhesion to moisture laden concrete slabs in areas such as basements and garages where it is roller or squeegee applied. It is sold in 1.5 Gallon Kits (Covers 250 sq. ft.) and can be applied to concrete as early as 48 hours after placement, reducing job-site downtime and delays in production.

With a 6 hour cure time, the UHS H2O dries in only half the time of the standard version and does not require scuff sanding prior to re-coating. This product is great for remedying low to moderate moisture issues as it is capable of holding back up to 6 lbs. of vapour drive (as measured by calcium chloride tests) in a single coat. When two coats are applied the UHS H2O will hold back up to 12 lbs. Also, due to its water-based formulation, it can be applied to diamond ground concrete therefore eliminating the need for shot-blasting to profile.

© Copyright Citadel Floors All Rights Reserved